Schemes and Information of Installanation Process

Installanation should be done by an authorized person. Installation process is described below:

Job Safety and Health Materials

  • E.Std.
  • E.Std.
  • E.Std.
  • E.Std.
  • E.Std.
  • E.Std.
  • Dust Mask
  • First-Aid Kit(Band-aid, hydrogen peroxide, bandage)
  • Tweezers
  • Overshoes

Installation Materials

  • Extra electric material; terminal, cable, tape
  • Paper tape, Packaging tape, Aluminum protective tape
  • Silicon white, transparent
  • Silicone cherry, walnut, light cherry, grey, beige
  • Derby adhesive
  • Hot silicone capsule
  • Epoxy Cartridge
  • Touch up paint, retouch pen
  • Polishing cloth cotton industry
  • Cleaning chemicals (for metal and wood surfaces)
  • Sandpaper
  • Sanding Sponge zero number
  • The utility knife tip
  • TOOLS NEEDED FOR INSTALLATION

Electric and Powered Tools

  • Pulse + Flat Drill
  • Drill 16 mm collet
  • Miter Cutting machine
  • Cordless drill / crimping machine
  • Circular saws
  • Jig Saw
  • Hand Planer
  • Hand milling
  • Vacuum Cleaner Small

Hand Tools and Toolkit

  • Several screwdrivers
  • Tool Bag
  • Screwdriver bits (Flat, for Phillips screws )
  • The team of Allie
  • Wrenches, socket wrench 16-17
  • Rubber mallet
  • Hammer 200 - 250 grams
  • Fastener Plastic Mouth (torture
  • Pliers
  • Pliers
  • needlenose pliers
  • Switch Foot Month
  • 20mm fine-toothed Lamar ege
  • Silicone gun
  • Tape Machine
  • Ladder Fork 4-digit
  • Connection cable 50m
  • Portable lamp orifice
  • Hot silicone gun
  • Epoxy gun
  • Retouch Brush
  • Retouch set
  • Cleaning Brush
  • Nylon stretch
  • Utility knife

Cutting Tools

  • drills ( 3/4/ 5/6/ 8/10 /13/ 16/18 mm )
  • Diamond Drill ( 6/7/ 8/9 /10/12 mm)
  • HSS twist drill team
  • Carbide tip diameter of 10 mm
  • Hinge drill ( 30/35 mm bit ) Core opening (60 mm punch )
  • skarpel (10/ 22/25 mm )
  • Milling Cutter Razor ( 12/18 mm Diameter h: 55mm )
  • Melamine Saw 250mm
  • Aluminum Saw 250mm
  • Jigsaw + redundant
  • Measurement, Control and Marking Tools

  • Tape Measure 5m
  • Steel meter 50cm
  • Steel 30cm square
  • Control item
  • Pencils
  • Clinometer ( scales ) 60-120 cm
  • Workbench practice template
  • Steel Marking Spot
  • Handle, hinge base, special accessory mounting patterns
  • Installation of detection devices